SVSi N8002 User Manual
N8002 quick start

Distribution | Switching | Recording | Windowing | Wall Processing | Control
360B Quality Circle Suite 200, Huntsville, AL 35806
www.svsiav.com
800DOCN8002QSREV1.3
N8002 QUICK START
Your Conductor N8002 is designed to control a video-over-IP
distribution system made up of SVSi encoders and decoders.
Connection to the video network is through the gigabit Ethernet
ports on the back of the Conductor N8002 as shown.
All SVSi devices must be connected though Ethernet port 1 on the
right. Ethernet port 0 on the left is for separate corporate LAN. Every
N8002 ships with a default static Ethernet port 0 IP address of
192.168.1.99 and a default static Ethernet port 1 IP address of
169.254.10.99.
To connect to your Conductor N8002 for the first time, plug a
network connection into Ethernet port 0 and browse to 192.168.1.99
using Firefox, Chrome, or Internet Explorer. The network connection
for the host machine must have the 192.168.1.xxx domain. The
log-in screen should appear.
Ethernet 0 = Corporate LAN
Ethernet 1 = SVSi Network
17”
15.5”
1.75
The default username and password is “admin” and “password”.
The username and password above is for the default administrator account. Once logged in, this can be changed and additional user
and administrator accounts added. If the only administrator account is the default admin account and the password is changed, make
sure to record this password since there is no way to recover.
For technical support, please visit http://support.svsiav.com or contact SVSi at 256.461.7143.
Distribution | Switching | Recording | Windowing | Wall Processing | Control
360B Quality Circle Suite 200, Huntsville, AL 35806
www.svsiav.com
800DOCN8002QSREV1.3
N8002 QUICK START
Your Conductor N8002 is designed to control a video-over-IP
distribution system made up of SVSi encoders and decoders.
Connection to the video network is through the gigabit Ethernet
ports on the back of the Conductor N8002 as shown.
All SVSi devices must be connected though Ethernet port 1 on the
right. Ethernet port 0 on the left is for separate corporate LAN. Every
N8002 ships with a default static Ethernet port 0 IP address of
192.168.1.99 and a default static Ethernet port 1 IP address of
169.254.10.99.
To connect to your Conductor N8002 for the first time, plug a
network connection into Ethernet port 0 and browse to 192.168.1.99
using Firefox, Chrome, or Internet Explorer. The network connection
for the host machine must have the 192.168.1.xxx domain. The
log-in screen should appear.
Ethernet 0 = Corporate LAN
Ethernet 1 = SVSi Network
17”
15.5”
1.75
The default username and password is “admin” and “password”.
The username and password above is for the default administrator account. Once logged in, this can be changed and additional user
and administrator accounts added. If the only administrator account is the default admin account and the password is changed, make
sure to record this password since there is no way to recover.
For technical support, please visit http://support.svsiav.com or contact SVSi at 256.461.7143.