beautypg.com

SVSi N2000 User Manual

N2000 quick start

background image

N2000 QUICK START

Please contact SVSi technical support @ svsiav.com or 256.461.7143 x9900 for any
installation issues. Visit our support webpage at support.svsiav.com.

Distribution Switching Recording Windowing Wall Processing Control

Southern Vision Systems, Inc.

256. 461.7143

www.svsiav.com

SVSi is a trademark of Southern Vision Systems, Inc. in the United States and other countries.
800DOCN2000QSREV2.1

Made in the USA.

Optional Accessories:
N9312 12V External Power Supply

N9101 Rack Mounting Wings

N9102 1RU Rack Shelf (holds 2 cards)

N6123 Dual-Channel Networked Video Recorder

N9206 2RU Card Cage (holds 6 cards)

N2510 4x1 Windowing Processor

N9382 1RU 12V/16-unit power supply

Troubleshooting Guidelines

Problem

Possible Solutions

“Local Play” graphic is displayed.

• Verify decoder is assigned to view a valid stream in

the N-Able matrix.

• Verify decoder is currently in “live play” mode

(black text on matrix view).

• Verify network is properly configured and set up. If

needed, connect encoder directly to decoder to
verify network issues.

“Host Play” graphic is displayed.

• Verify encoder is in live play mode (black text in

matrix).

• Verify source is attached and is outputting a valid

signal (DVI light on encoder is lit).

“Unsupported Resolution” graphic
is displayed.

• Change source resolution to a valid resolution (try

720p60).

• Verify cabling is correct.

“Copy Protected Content” screen is
displayed.

• Contact SVSi technical support.

Black screen/no graphic is dis-
played.

• Set decoder to local play. If the local play graphic

does not appear, check the display input settings
and cabling.

• If local play appears, set decoder to live play and

verify network is configured properly.

No Audio is detected.

• If there is no audio on all decoders, verify audio

settings are correct on encoder.

• If there is no audio on a single decoder, verify

audio settings are correct on decoder.

Congratulations on the purchase of your N2000 series product — part of SVSi’s family of Networked AV
products. SVSi’s N2000 product line includes the N2121 and N2141 encoders and the N2211, N2221,
and N2241 decoders. An SVSi Networked AV system comprises video and/or audio encoders, decoders,
and other network accessories including recording solutions, multi-window processing, audio-only end
points, and system controllers. The system allows you to distribute HD Video, Audio and Control across
a gigabit Ethernet network. Options are available for recording, playback, and wall processing.

Network Bandwidth per video stream = 20-500Mbs (user-selectable). Units can be daisy-chained or connected
to a gigabit Ethernet layer-3 switch supporting IGMP-query. Please contact SVSi to obtain a pre-configured
switch, or more details regarding daisy-chaining limitations.

The DVI-I connector on the N2000 encoder auto-senses either analog or digital video and converts input
video to network packets for output through the RJ45 connector. Audio can be input as embedded digital
audio through the DVI-I connector or as balanced analog audio through the 5-pin phoenix AUDIO
connector. Both encoder and decoder can be powered either using the 12V optional external power
supply or by Power-over-Ethernet (PoE).

The N2000 series decoder accepts the network packets and reconstitutes synchronized video and audio
for display through its DVI-D port. Digital-only video is output by the decoder. IR and serial commands
can be transmitted by either encoder or decoder using SVSi's free N-Able configuration software, SVSi's
N8000-series controller, or using third party controllers. IR and RS232 serial ports are not pass-through
and must use a central controller to direct commands to each device.

1

N2000 Series Encoder Rear View

7.888

1

2

3

4

5

6

7

8

9

1.050

1) 12VDC Input (not needed with PoE)
2) Status Indicators
3) RJ45 Auto-Sensing Gigabit Ethernet

Switch Port — PoE

4) RJ45 Auto-Sensing Gigabit Ethernet

Switch Port

5) Infrared (IR) Emitter Connection

6) RS232 Connection
7) Analog Audio Input Connection
8) Pass-Through DVI-D Connection
9) DVI-I Digital Input
10) Analog Audio Output Connection
11) DVI-D Digital Output

7.888

1.050

1

2

3

4

5

6

10

11

N2000 Series Decoder Rear View

This manual is related to the following products: