SVSi N2000 Series - Manual (Page 27)

Page 27 N2000 Series User Manual www.svsiav.com
Chapter 2. Installation Step-by-Step Installation Instructions
4. Double-click the Encoder’s name in the list. The N-Series Encoder Login page is displayed
(see Figure 2-8 ). Use the following default login credentials to log in for the first time. These
can be changed later on the Settings page.
Default username: admin
Default password: password
Figure 2-8. Login Page
5. The Settings page is displayed (see Figure 2-9 ).
6. Change the Stream setting. We recommend setting Stream to a number between 2 and 254
(it is required that the number be less than 32,512).
The Login page is only displayed if N-Able's stored username/password does not match the
unit's username/password. A default system will match.