SVSi N2000 Series - Manual (Page 55)

Page 55 N2000 Series User Manual www.svsiav.com
Chapter 3. Encoder Options DVI Pass Thru Settings
DVI Pass Thru Settings
The section of the Settings page show in Figure 3-11 is displayed when you click the DVI Pass Thru
Settings link. Options are described in Table 3-8 .
Figure 3-11. DVI Pass Thru Settings
Table 3-8. Settings Page: DVI Pass Thru Settings
Option Description
DVI Pass Thru Enables looped output.
Enable HDMI Audio Determines if the unit will output audio over the HDMI connection. Selecting Auto
bases audio output on the settings of the connected source device.
YCbCr 4:2:2 Output For color conversion. Can force to RGB on set output based on connected
device’s reported settings. Default (and preferred setting) is Off.
Simplified DVI
Detect When enabled, detects DVI solely based on the hot plug detection. Enable to help
prevent displays/monitors from going to sleep.
Invert DVI Sync Inverts horizontal and vertical synchronization to the output display. Used for non-
standard displays.
Cancel Click to return all controls to the last saved configuration.
Save Click to accept changes made to these controls.