SVSi N2000 Series - Manual (Page 44)

Page 44 N2000 Series User Manual www.svsiav.com
Chapter 3. Encoder Options Advanced Settings
Gratuitous ARP Enable the Encoder to send a periodic
Address Resolution Protocol (ARP)
packet to the network.
ARP Interval (secs) Determine how often (in seconds) the
unit transmits gratuitous ARP packets.
Unsolicited Status Enable the Encoder to send a periodic
status packet to the Send Status
Address described below.
Send Status
Address When Unsolicited Status is enabled,
the Encoder sends a periodic status
packet to the IP address specified
here.
Status Interval
(secs) Determine how often (in seconds) the
unit transmits status packets.
Discovery Packet
Transmit Enable the SVSi multicast discovery
service (which is used to identify units). This is useful for larger network
integrations when broadcast packets
will not cover the entire network.
Enabled by default.
Discovery Interval
(secs) Determine how often (in seconds) the
unit transmits discovery packets.
TTL Select the Time To Live (TTL) for the
transmit audio and video streams. Limits the lifespan of data on the
transmit audio and video streams (to
improve performance).
VLAN Tagging When enabled, tags the video and
audio IP packet with the VLAN
number.
VLAN # Enter the VLAN number. This number will be included in the
video and audio IP packet when VLAN
Tagging is enabled.
DSCP # Select the Differentiated Services
Code Point (DSCP) for the transmit
audio and video streams.
Serial Master Enable Enable this device to be the master to
the designated slave.
Serial Slave
Address Enter the IP address of the serial slave
device.
Table 3-2. Settings Page: Advanced Settings (Continued)
Option Description Notes