Super Systems SDStatus - Manual (Page 49)

SDStatus View and Workstation Operations Manual
Super Systems Inc. Page 49 of 83
The Manage Bit Trigger Alarms window (Figure 68) contains the following parts:
• Alarm List (“A”): This area of the window shows all defined alarms. If an alarm is set to
trigger a bit, it will be highlighted in a beige color (note the “Temperature Slot Alarm”
below). When an alarm is selected, it will be highlighted in a light blue color (note the
“Watchdog 1” alarm below).
• Triggered Bits (“B”): This area of the window displays the bits that are triggered when
the selected alarm is active.
• “Add Trigger Target” button (“C”): When clicked, this button allows you to set a bit to be
set when the selected alarm is on.
• “Remove Trigger Target” button (“D”): When clicked, this button will remove a selected
bit trigger.
• “Clear Selected Bit” (“E”): When clicked, this button will clear the selected bit (that is,
the bit will be set to “OFF” or zero).
Figure 68 - Manage Bit Trigger Alarms window
Help Menu
The Help menu contains two options: Check for Updates and About.
Check for Updates
This option will check the Internet for updates to SDStatus View and, if an update is found, give
you the option to download and install it (Figure 69). It is recommended that you keep your
software up-to-date and download updates when they are available.
A
B
C
E
D