Super Systems SDStatus - Manual (Page 23)

SDStatus View and Workstation Operations Manual
Super Systems Inc. Page 23 of 83
Unable to Contact Server Alarm: This alarm is
generated when SDStatus unable to find the
IntTbl.dat file on a defined server. This may
happen when a server is down for some reason,
when a network communication error takes place,
or when there is a problem with the SuperDATA
setup. This alarm will be automatically set if SDIO
is not running. The following fields are set up in
the alarm setup window (Figure 31):
• Alarm Name: A user-defined name for the
alarm.
• Cause: The cause of the alarm (typically
used by operators). This field is optional.
• Action: The corrective action
recommended (typically used by
operators). This field is optional.
• Server: The server to be monitored. (This
is a drop-down menu; servers must be
defined before one can be selected.)
The Red Alert checkbox causes the alarm to
generate a System Tray notification and also
causes the alarm to appear in red in the alarms
notification area.
Figure 31 - Unable to Contact
Server Alarm window