Super Systems SDStatus - Manual (Page 36)

SDStatus View and Workstation Operations Manual
Super Systems Inc. Page 36 of 83
Figure 49 - Email Times window
Click the “Add Email Time” button to set up a notification.
The Add Email Time window (Figure 50) allows you to set up the association between an alarm
group and an email address group. When an alarm condition is present within the alarm group
for a set period of time, an email will be sent to the addresses in the email address group.
Figure 50 - Add Email Time window
Select the alarm group in the Alarm Group drop-down box and the email address group in the
Email Address Group drop-down box. Then set the amount of time that must pass before an
alarm notification email is sent to the selected email address group. If you want to set a
frequency for repeating the notification email (as long as an alarm condition remains true) after
the first notification is sent, click the “Use Frequency” box and enter the desired frequency
times. Click “Add Email Time” when finished.
If you want the process of sending the email to start after the alarm becomes active, set the
email time to 0 Days, 0 Hours, and 0 Minutes.
A B C D