Sundance SMT916 - Manual (Page 21)

Channel 8 - IODelay – 0x38 (Read-Write register).
Setting Bit 5...0 Description – Channel Selection
0 Must be a value between 0 and 63. Delay step is 78pS.
3.4.20 Channel 9 – IODelay – 0x39.
Channel 9 - IODelay – 0x39 (Read-Write register).
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Reserved IODelay
Default “00” “000000”
Channel 9 - IODelay – 0x39 (Read-Write register).
Setting Bit 5...0 Description – Channel Selection
0 Must be a value between 0 and 63. Delay step is 78pS.
3.4.21 Channel 10 – IODelay – 0x3A.
Channel 10 - IODelay – 0x3A (Read-Write register).
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Reserved IODelay
Default “00” “000000”
Channel 10 - IODelay – 0x3A (Read-Write register).
Setting Bit 5...0 Description – Channel Selection
0 Must be a value between 0 and 63. Delay step is 78pS.
3.4.22 Channel 11 – IODelay – 0x3B.
Channel B - IODelay – 0x3B (Read-Write register).
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Reserved IODelay
Default “00” “000000”
Channel B - IODelay – 0x3B (Read-Write register).
Setting Bit 5...0 Description – Channel Selection
0 Must be a value between 0 and 63. Delay step is 78pS.