Sundance SMT916 - Manual (Page 18)

Storage Control Register – 0x15 (Read-Write register).
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
1 Reserved Reserved Reserved Reserved LED11 LED10 LED9 LED8
Default ‘0’ ‘0’ ‘0’ ‘0’ ‘0’ ‘0’ ‘0’ ‘0’
0 LED7 LED6 LED5 LED4 LED3 LED2 LED1 LED0
Default ‘0’ ‘0’ ‘0’ ‘0’ ‘0’ ‘0’ ‘0’ ‘0’
3.4.10 Channel Selection for read back operation – 0x20.
Channel Selection for read back operation – 0x20 (Read-Write register).
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Reserved Selection
Default “0000” “0000”
Channel Selection for read back operation – 0x20 (Read-Write register).
Setting Bit 3...0 Description – Channel Selection
3 “1101” ADC11 (Group B) channel is connect – to read samples collected and stored into storage
unit
... ...
2 “0010” ADC1 (Group A) channel is connect – to read samples collected and stored into storage
unit
1 “0001” ADC0 (Group A) channel is connect – to read samples collected and stored into storage
unit
0 “0000” Register read back
On the SMT916, Group A is made out of ADC0-5 and Group B is composed of ADC6-
11.
3.4.11 Channel 0 – IODelay – 0x30.
Channel 0 - IODelay – 0x30 (Read-Write register).
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Reserved IODelay
Default “00” “000000”
Channel 0 - IODelay – 0x30 (Read-Write register).
Setting Bit 5...0 Description – Channel Selection
0 Must be a value between 0 and 63. Delay step is 78pS.
3.4.12 Channel 1 – IODelay – 0x31.
Channel 1 - IODelay – 0x31 (Read-Write register).
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Reserved IODelay
Default “00” “000000”