Sundance SMT916 - Manual (Page 19)

Channel 0 - IODelay – 0x31 (Read-Write register).
Setting Bit 5...0 Description – Channel Selection
0 Must be a value between 0 and 63. Delay step is 78pS.
3.4.13 Channel 2 – IODelay – 0x32.
Channel 2 - IODelay – 0x32 (Read-Write register).
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Reserved IODelay
Default “00” “000000”
Channel 2 - IODelay – 0x32 (Read-Write register).
Setting Bit 5...0 Description – Channel Selection
0 Must be a value between 0 and 63. Delay step is 78pS.
3.4.14 Channel 3 – IODelay – 0x33.
Channel 3 - IODelay – 0x33 (Read-Write register).
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Reserved IODelay
Default “00” “000000”
Channel 3 - IODelay – 0x33 (Read-Write register).
Setting Bit 5...0 Description – Channel Selection
0 Must be a value between 0 and 63. Delay step is 78pS.
3.4.15 Channel 4 – IODelay – 0x34.
Channel 4 - IODelay – 0x34 (Read-Write register).
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Reserved IODelay
Default “00” “000000”
Channel 4 - IODelay – 0x34 (Read-Write register).
Setting Bit 5...0 Description – Channel Selection
0 Must be a value between 0 and 63. Delay step is 78pS.