Sundance SMT310 v.1.6 - Manual (Page 8)

User Manual (QCF42); Version 3.0, 8/11/00; © Sundance Multiprocessor Technology Ltd. 1999
1 Introduction
The SMT310 is a single site module carrier board that provides access to a TIM
module over the PCI bus.
An on-board JTAG controller allows systems to be debugged using Code Composer
Studio. This JTAG controller also has buffered outputs that can be accessed using
connectors on the carrier’s back panel. This allows off-board devices to be connected
into the JTAG chain.
A single buffered ComPort with conflict protection is also available on the chassis
back panel. This will have the versatility to access any of four ComPorts on the TIM.
The main connection to the PCI bus is via the module Global Bus. A single ComPort
is also be mapped to the PCI bus providing support for application boot and data
transfer.
A 1 MB of SRAM is mapped on to the Global Bus and can be accessed by the TIM as
a global resource or by the PCI Bridge.
The board requires a 3.3 volt supply that is taken from the PCI edge connector and is
made available at the fixing pillars for the module.
An ‘on-board’ SDB interface to the PCI Bridge allows the card to be interfaced to SDB
standard modules.