Sundance SMT310 v.1.6 - Manual (Page 46)

User Manual (QCF42); Version 3.0, 8/11/00; © Sundance Multiprocessor Technology Ltd. 1999
18 Cables and Connectors
18.1 SDB
No SDB cables are supplied with the SMT310. You can order them separately from
Sundance with part number SMT510-SDBxx, where xx is the cable length in
centimetres.
18.1.1 SDB Connector
Function Pin Pin Function Function Pin Pin Function
GND 2 1 CLK D9 21 22 GND
GND 4 3 D0 D10 23 24 GND
GND 6 5 D1 D11 25 26 GND
GND 8 7 D2 D12 27 28 GND
GND 10 9 D3 D13 29 30 GND
GND 12 11 D4 D14 31 32 GND
GND 14 13 D5 D15 33 34 GND
GND 16 15 D 6 USERDEF0 35 36 GND
GND 18 17 D7 WEN 37 38 REQ
GND 20 19 D8 USERDEF1 39 40 ACK
Table 20: SDB Pin-out
18.2 ComPorts
The cables used with FMS connectors are not supplied with the SMT310. You can
order them separately from Sundance with part number SMT500-FMSxx, where xx is
the cable length in centimetres.
18.3 Buffered ComPort Cabling
Connecting between buffered ComPorts requires a 1 to 1 cable; the SMT502-Buffer
is the recommended cable assembly and can be purchased separately.
Cable plugs 3M Scotchflex 10126-6000EL FES part 038740A
Plug shells 3M Scotchflex 10326-A200-00 FES part 038760D
Cable type 3M Scotchflex KUCKMPVVSB28-13PAIR FES part 038781E