Sundance SMT310 v.1.6 - Manual (Page 10)

User Manual (QCF42); Version 3.0, 8/11/00; © Sundance Multiprocessor Technology Ltd. 1999
3 Setting Up the SMT310
The SMT310 should be set up in the following way.
• Turn the PC off and insert the Card into a spare PCI slot.
• Switch on PC and wait for the OS to boot up.
• Windows 95/98/NT/2000 will detect a new hardware.
• Windows should automatically find the drivers from the CD, if not browse to the
CD or if you downloaded from the ftp site to the folder where you unzipped the
SMT6300 software.
• When you run it, 3L application software will be able to detect the SMT310
provided the SET TISLINK variable is set to SMT320.
• You can run the SMTBoardInfo application to detect the number of SMT310s in
your system and report their slot positions and I/O addresses. This information is
required when setting up code composer for the board. SMTBoardInfo is installed
as part of the SMT6300 package.