beautypg.com

Sundance PARS User Manual

Page 29

background image

Revision 11-wip-7

Page 29 of 70

Sundance Digital Signal Processing, Inc.

4790 Caughlin Parkway 233, Reno, NV 89519-0907, U.S.A.

email:

[email protected]

Tel: +1 (775) 827-3103

www.sundancedsp.com

Figure 28 – Link-layer interface selection

When the testbench is executed, the ‘DSPLink’ block will be invoked which interfaces to the PARS-
supplied link interface driver

’DSPLink.dll’. This driver is based on 3L/Diamond’s HOST

interface specification. You may use any hardware that is supported by Diamond

5

.

In this instance, in this example, we are communicating with an embedded system over a USB link
supported by the SMT6048

6

driver package.

Figure 29 - AddOne model running on hardware

The ‘AddOne’ model is now running hardware-in-the-loop.

5

Hardware vendors supporting 3L/Diamond supply link-layer drivers with their board support (BSP) packages.

6

See:

http://www.sundance.com/web/files/productpage.asp?STRFilter=SMT6048