Sloan ELS-63000 Installaton - Manual (Page 9)

A
FOR ELS-70000
SERIES ONLY – Install
Soap Dispenser Pump (SJS-
1650 for battery powered
applications and SJS-1750
for hardwire applications) at
the location(s) shown. Mount
Soap Dispenser as instructed
in the Installation Instructions
furnished with the Soap
Dispenser using spacers and
extended length screws
provided.
SIDE VIEW
DOUBLE AND TRIPLE
STATION SINKS FRONT VIEW — DOUBLE STATION SINK
FRONT VIEW — TRIPLE STATION SINK
SLOANSTONE® CARE AND MAINTENANCE
OPTIONAL – SOAP DISPENSER PUMP MOUNTING INSTRUCTIONS
REFER TO FAUCET OR SOAP DISPENSER INSTALLATION INSTRUCTIONS
SHEET FOR TROUBLESHOOTING AND OPERATION INSTRUCTIONS
SloanStone ® surfaces may be easily cleaned using a conventional cleaning agent such as an ammonia based liquid cleaner (glass cleaner). Cover
faucet(s) and, if applicable, soap dispenser(s) to protect the finish. DO NOT USE the same cloth that was used to wipe down SloanStone surface as
the faucet(s) and, if applicable, soap dispenser(s).
Dry stains on a matte finish can be removed with a 3M Scotch-Brite scouring pad or a mild abrasive cleaner.
Burns or scorches can be removed by sanding with the Light Duty Buffing Pad (included with SloanStone sinks). Follow sanding with the General
Purpose Buffing Pad (included with SloanStone sinks) to match finish of sanding area to surrounding area. A final buffing may be required on polished
surfaces. Accidental nicks or chips can be repaired with a special patch kit available in all SloanStone colors, contact Sloan 1-888-SLOAN-14
(1-888-756-2614) or your Sloan Representative, if needed.
Avoid exposing SloanStone surfaces to strong chemicals such as acetones, paint removers/thinners and sulfuric acid, or hydrochloric chemical
cleaners. Exposure to strong chemicals may result in permanent damage to SloanStone surfaces.