Sloan ELS-63000 Installaton - Manual (Page 8)

Front Panel
Fastener (2)
8
Triple Station
Double Station
Front Panel (2)
A
Replace Front Panel by hanging top lip of Panel into track of
Trim Rail under Basin. Swing panel into position and affix with 2
Fasteners. For triple station sinks, repeat this procedure for
second panel.
Fastener (2)
11 – INSTALL FRONT PANEL(S) – FOR ELS-70000 SERIES ONLY
A
Replace cover and screws and tighten firmly in place with t-
handled wrench.
B
Install plastic cabinet by fastening it to the wall via screws
through cabinet’s mounting eyelets. Double-station (6) fasteners
and triple-station (8) fasteners.
Prior to fastening the triple-station cabinet to the wall, bring the
cabinet to the basin and press the front of the cabinet to the
basin ensuring that the velcro straps, pre-applied to the basin
and cabinet, meet and attach firmly. Allow the cabinet to hang
from the basin, while fastening the cabinet to the wall.
12 – INSTALL COVER CABINET – FOR ELS-60000 SERIES ONLY
NOTE: ENSURE THAT THERE ARE NO GAPS BETWEEN
THE BASIN AND CABINET, AND THE CABINET AND WALL.
PLASTIC
CABINET
MOUNTING
EYELETS (8)
P-TRAPS (2)
(NOT INCLUDED)
PLASTIC
CABINET
MOUNTING
EYELETS (6)
P-TRAPS (2)
(NOT INCLUDED)
VELCRO
STRAPS
INSIDE
CABINET