beautypg.com

Parts list – Sloan ETF-80 Faucet User Manual

Page 8

background image

SLOAN VALVE COMPANY • 10500 Seymour Avenue • Franklin Park, IL 60131

Phone: 1-800-982-5839 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380

www.sloanvalve.com

Printed 11-08

Copyright © 2008 SLOAN VALVE COMPANY

PARTS LIST

1A
1B

2

3

8

11

10

5

6A

6B

7

9

OPTIONAL TRIM PLATES

(See Parts Table for Available

Optional Trim Plates)

4

12

15

14

13

OPTIONAL MIXING VALVES

Item

Part

Description

No.

No.

OPTIONAL TRIM PLATES

12

ETF-299-A

4” (102 mm) Centerset Trim Plate Kit for ETF-80 Faucet
with Optional Mixing Valve includes Dual Hole CP Cover
Plate and Black Plastic Base Plate

ETF-510-A

8” (203 mm) Centerset Trim Plate Kit for ETF-80 and ETF-
880 Faucet (Faucet Only) includes two (2) Finger Nuts, two
(2) Washer Gaskets, two (2) Fender Washers, Base Gasket,
Back-up Spacer and CP Single Hole Trim Plate Assembly
(not shown)

ETF-104-A

8” (203 mm) Centerset Trim Plate Kit for Faucet with
Optional Mixing Valve (not shown)

OPTIONAL MIXING VALVES

13

MIX-60-A

Below Deck Mechanical Water Mixing Valve (BDM
Variation)

14

MIX-135-A

Below Deck Thermostatic Water Mixing Valve (BDT
Variation)

15

MIX-110-AA

Optimix

®

Deck Mounted Water Mixing Valve (ADM

Variation)

FAUCET CABLE EXTENSION CORDS

Faucet to Control Module

Solenoid to Control Module

ETF-1005-26

26 Inch (0.7 meter) Length

ETF-1003-36

36 Inch (0.9 meter) Length

ETF-1005-36

36 Inch (0.9 meter) Length

ETF-1003-48

48 Inch (1.2 meter) Length

ETF-1005-72

72 Inch (1.8 meter) Length

ETF-1003-72

72 Inch (1.8 meter) Length

ETF-1005-108 108 Inch (2.7 meter) Length

ETF-1003-108 108 Inch (2.7 meter) Length

SOLENOID VALVE REPAIR KITS

ETF-1009-A

Solenoid repair kit

ETF-437-A

Solenoid compression fitting kit

NOTICE: The information contained in this document is subject to change without
notice.

Item

Part

Description

No.

No.

1A

ETF-250-A

Faucet/Sensor Assembly (ETF-80)

ETF-631-A

Throat Plate Sensor Assembly Only (for ETF-80 Faucets
manufactured after October 2003, identified by an all white
Sloan name on Sensor)
For ETF-80 faucets manufactured prior to October 2003
(identified by a white and red Sloan name on throat plate),
sensor assembly discontinued. Use ETF-250 Faucet/Sensor
assembly.

1B

ETF-625-A

Faucet/Sensor Assembly (ETF-880)

ETF-628-A

Throat Plate Sensor Assembly Only (ETF-880)

2

ETF-1021-A

0.5 gpm (1.9 Lpm) Spray Head with Key

ETF-1022-A

2.2 gpm (8.3 Lpm) Aerator Spray Head with Key

ETF-1028-A

1.5 gpm (5.7 Lpm) Laminar Flow Spray Head

3

ETF-435

Key (Not Required for ETF-1028-A Laminar Flow Spray Head)

4

ETF-295-A

4” (102 mm) Centerset Trim Plate Kit for ETF-80 Faucet
(Faucet Only) includes two (2) Nuts, two (2) Hex Screws, two
(2) Flat Washers, Single Hole CP Cover Plate and Black
Plastic Base Plate

ETF-662-A

4” (102 mm) Centerset Trim Plate Kit for ETF-880 Faucet
(Faucet Only) includes Back-up Spacer (not shown)

5

ETF-290-A

Faucet Mounting Kit, Includes Rubber Gasket, Flange Nut and
ETF-297 1/4" to 3/8" Compression Fitting Connector

6A

ETF-297

1/4" to 3/8" Compression Fitting Connector

6B

ETF-617-A

3/8” Bak-Chek

®

Tee Compression Fitting

7

ETF-370-A

Solenoid Valve, 24 VAC, Includes Wire Harness

8

ETF-450-A

Control Module Assembly

9

ETF-233

Plug-In Transformer

10

EL-248-40

Box Mount Transformer

11

ETF-458-A

Power Cable (Transformer to Control Module) with Strain Relief
and two (2) Crimp Connectors

For additional information about Sloan Mixing Valves or Trim Plates, consult our
Installation Instructions and Maintenance Guides.
If further assistance is required, please contact the Sloan Valve Company Installation
Engineering Department at 1-888-SLOAN-14 (1-888-756-2614).

This manual is related to the following products: