Sloan 110 Dolphin Flushometer - Manual (Page 2)

FIN.
FLOOR FIN.
WALL
CENTERLINE
OF FIXTURE
1” I.P.S.
SUPPLY
(25 mm DN)
4-3/4” (121 mm)
2-1/4”
(57 mm) MIN.
CENTERLINE
OF WASTE
11-1/2”
(292 mm)
FIN.
FLOOR FIN.
WALL
CENTERLINE
OF FIXTURE
1” I.P.S.
SUPPLY
(25 mm DN)
4-3/4” (121 mm)
2-1/4”
(57 mm) MIN.
CENTERLINE
OF WASTE
24”
(610 mm)
FIN.
FLOOR
FIN.
WALL
CENTERLINE
OF FIXTURE
1” I.P.S.
SUPPLY
(25 mm DN)
4-3/4” (121 mm)
2-1/4”
(57 mm) MIN.
11-1/2”
(292 mm)
FIN.
WALL
CENTERLINE
OF FIXTURE
3/4” I.P.S.
SUPPLY
(20 mm DN)
4-3/4” (121 mm)
2-1/4”
(57 mm) MIN.
CENTERLINE
OF WASTE
11-1/2”
(292 mm)
FIN.
WALL
CENTERLINE
OF FIXTURE
1” I.P.S.
SUPPLY
(25 mm DN)
4-3/4” (121 mm)
2-1/4”
(57 mm) MIN.
24”
(610 mm)
FIN.
WALL
CENTERLINE
OF FIXTURE
1” I.P.S.
SUPPLY
(25 mm DN)
4-3/4” (121 mm)
2-1/4”
(57 mm) MIN.
CENTERLINE
OF WASTE
11-1/2”
(292 mm)
CENTERLINE
OF FIXTURE
1/2” I.P.S.
SUPPLY
(15 mm DN)
4-3/4” (121 mm)
2-1/4” (57 mm)
MIN.
9”
(229 mm)
CENTERLINE
OF FIXTURE
1/2” I.P.S.
SUPPLY
(15 mm DN)
4-3/4” (121 mm)
2-1/4”
(57 mm) MIN.
12-1/2”
(317 mm)
CENTERLINE
OF WASTE
6-1/2”
(165 mm)
MIN.
1/2”
(13 mm)
1/2”
(13 mm)
FIN.
FLOOR
FIN.
WALL
CENTERLINE
OF WASTE
FIN.
FLOOR
FIN.
FLOOR
FIN.
FLOOR
MODEL 110 — Water Saver, 3.5 gpf (13.2 Lpf)
MODEL 111-1.6 — Low Consumption, 1.6 gpf (6.0 Lpf)
MODEL 115 — Water Saver, 3.5 gpf (13.2 Lpf)
MODEL 115-1.6 — Low Consumption, 1.6 gpf (6.0 Lpf)
MODEL 120 — Water Saver, 3.5 gpf (13.2 Lpf)
MODEL 120-1.6 — Low Consumption, 1.6 gpf (6.0 Lpf)
MODEL 186-1.0 — Low Consumption, 1.0 gpf (3.8 Lpf)
Shipboard Model Type I
Class A Shock Proof — 3.5 gpf (13.2 Lpf)
Shipboard Model Type II
Class A Shock Proof — 1.0 gpf (3.8 Lpf)
Shipboard Model Type I
Class B Rigid Installation — 3.5 gpf (13.2 Lpf)
Shipboard Model Type II
Class B Rigid Installation — 1.0 gpf (3.8 Lpf)
2
Dolphin Flushometer factory settings are made at 40 psi (275
kPa). Actual flush volume will vary with pressure and flow rate.
VALVE FLUSH VOLUME ADJUSTMENT RANGE
Closet: 0.5 to 16.0 gpf (1.9 to 60.6 Lpf)
Urinal: 0.25 to 12.0 gpf (0.9 to 45.4 Lpf)
Items shown by dotted lines are NOT supplied by Sloan Valve
Company. Shock Proof Installations do NOT include fixture
connections, clamps or rubber hoses.
For Saltwater, Seawater and all Shipboard Flushometers,
Sloan Valve Company recommends furnishing Dolphin Valves
with a Ground Joint Supply Stop. Specify “-GJ” (Ground Joint)
variation. Standard Shipboard Flushometers use Ground Joint
Supply Stops.
Saltwater and other non-potable water supplies do not typically
require the use of Vacuum Breakers. To order a Flushometer
without a Vacuum Breaker, specify “-XYV” variation.
Shipboard Flushometer Valves can be supplied with a Sil-Braze
Inlet Adapter. Please specify when ordering. For Type I Water
Closet applications, use a 1” (25 mm) adapter. For Type II Urinal
applications, use a 1/2” (13 mm) adapter.
NOTES
VALVE ROUGH-INS
MODEL 110/111
MODEL 186
MODEL 115
SHIPBOARD MODEL TYPE I
CLASS A SHOCK PROOF
SHIPBOARD MODEL TYPE I
CLASS B RIGID INSTALLATION
MODEL 120
SHIPBOARD MODEL TYPE II
CLASS A SHOCK PROOF
SHIPBOARD MODEL TYPE II
CLASS B RIGID INSTALLATION