Skutch Electronics BA-1000-A V4.00 - Manual (Page 9)

Version 4.00 Page 9
11 3432234 *2 11 3432234 *2 11 3432234 *2 11 3432234 *2
1234 #
1234 # 1234 # 1234 #
Wait for the Beep then press ~ ~ ~ ~.
! Set to Auto Answer
Press: ~ ~ ~ ~.
Wait 5 seconds.
Press and HOLD DOWN the
* * * * until the unit
Beeps, then release.
! Local Playback
Press: ~ ~ ~ ~.
Wait 5 seconds.
Press and HOLD DOWN
4 4 4 4 until you hear a
Beep, then release.
! Remote Playback
Call the BA-1000-A from a Touch Tone
telephone.
After the message starts to play, enter:
* 1234 # * 1234 # * 1234 # * 1234 #
The system will play back the Urgent
messages. When finished, if you have more
messages on the system, it will Beep 3 times; now
enter a
0 0 0 0 within 4 seconds to hear these messages.
! Remotely Program
Notification Phone
Numbers
Call the BA-1000-A from a Touch Tone
telephone.
After the message starts to play, enter:
* 0506 # * 0506 # * 0506 # * 0506 #
Wait 1 seconds.
Press:
1 1 1 1
For this example we are entering a home phone
number, then a pager phone number.
786-6100 (Home)
343-2234 (Pager) - Pager to display 1234.
Enter:
13 7866100 # 13 7866100 # 13 7866100 # 13 7866100 #
Wait for the Beep then enter:
11 3432234 *2 11 3432234 *2 11 3432234 *2 11 3432234 *2
1234 #
1234 # 1234 # 1234 #
To exit, enter: ** ** ** **.
! Remotely Record
Outgoing Message
Call the BA-1000-A from a Touch Tone
telephone.
After the message starts to play, enter:
* 0506 # * 0506 # * 0506 # * 0506 #
Wait 1 seconds.
Press:
5 5 5 5
For BEST audio quality, hold the microphone 3
inches away from your mouth; when tone stops,
immediately dictate your message.
Press the * * * * to end.
To exit, press * * * *.
Sample Outgoing Message
"ABC Productions! I'm sorry but we are not
available to answer your call at this time. If you
need immediate assistance, please leave your
message then dial
8 8 8 8 on your telephone and we
will return your call very shortly. Thank you."
! Remote Change Between
Idle & Answer Modes
Call the BA-1000-A from a Touch Tone
telephone. If the system is in Idle Mode, it will ring
10 times before answering.
After the message starts to play, enter:
* 0506 # * 0506 # * 0506 # * 0506 #
Wait 1 second.
Press:
0 0 0 0 to change the state; first press
“Enables” (changes to Answer Mode), next press
“Disables” (changes to Idle Mode).
To exit, press * * * *.