Skutch Electronics BA-1000-A V4.00 - Manual (Page 8)

Version 4.00 Page 8
RINGER EQ.:0.0B
USOC No (Jack type) RJ-11, RJ-12, or RJ-13
(See telephone connection)
Operation
! Power Up
To power the unit up;
1) Make sure that the Microphone is disconnected
from the BA-1000-A.
2) Connect the supplied POWER ADAPTER to the
POWER jack on the rear panel of the BA-1000-
A. This MUST be done before the POWER
ADAPTER is connected to 115VAC power.
3) Now connect the POWER ADAPTER to a
115VAC 60Hz power outlet.
! Change the Time
To change the current time and/or date, do the
following:
Press: ~ ~ ~ ~.
Wait 5 seconds.
Enter:
8 8 8 8 8 8 8 8 8 8 8 8
Wait 5 seconds.
Press:
1 1 1 1.
Enter the day of the week, then # # # #; example:
1 1 1 1 = Sunday, 2 2 2 2 = Monday, etc.
Enter the new date then # # # #.
Enter the current time then # # # #; you change
between a.m. and p.m. with the * * * *. Example: 1:32
is 0132 # 0132 # 0132 # 0132 #.
Wait 5 seconds then press ~ ~ ~ ~.
! Record Outgoing Message
Plug microphone into MIC IN jack.
Press:
~ ~ ~ ~.
Wait 5 seconds.
Now press and HOLD DOWN: 5 5 5 5, and
begin talking after the low beep.
For BEST audio quality, hold the microphone 3
inches away from your mouth; when tone stops,
immediately dictate your message.
When finished, release the 5 5 5 5 to hear the
message.
Unplug the microphone.
Sample Outgoing Message
"ABC Productions! I'm sorry but we are not
available to answer your call at this time. If you
need immediate assistance, please leave your
message then dial
8 8 8 8 on your telephone and we
will return your call very shortly. Thank you."
! Test Outgoing Message
Press: ~ ~ ~ ~.
Wait 5 seconds.
Press and HOLD DOWN the
6 6 6 6 until the unit
Beeps.
Release the 6 6 6 6 to hear the message.
! Locally Program
Notification Phone
Numbers
Press: ~ ~ ~ ~.
Wait 5 seconds.
Enter:
1 2 3 1 2 3 1 2 3 1 2 3
Wait 5 seconds.
Press:
# # # #.
For this example we are entering a home phone
number, then a pager phone number.
786-6100 (Home)
343-2234 (Pager) - Pager to display 1234.
Enter:
13 7866100 # 13 7866100 # 13 7866100 # 13 7866100 #
Wait for the Beep then enter: