Sim2 Crystal - Manual (Page 4)

4 Important safety instructions
13. Do not attempt to disassemble this projector. There are dangerous high voltages inside
which may cause death if you should come into contact with live parts.
Under no circumstances should you ever undo or remove any other covers. Refer
servicing only to suitably qualified professional service personnel.
14. Do not install product if glasses appear damaged or broken. Go in touch with local
service for replacement.
15. The projector does not require internal adjustment. There are no user serviceable parts
inside the projector. To replace the bulb or any other repairs, contact your local service
centre, whose engineers will be happy to efficiently solve any problem.
Moisture condensation
Never operate the projector immediately after moving it from a cold location to a hot
location. When the projector is exposed to such a change in temperature, moisture may
condense on the crucial internal parts. To prevent the projector from possible damage,
do not use the projector for at least 2 hours when there is a sudden change in
temperature.
Avoid volatile liquids
Do not use volatile liquids, such as insecticide or certain types of cleaner, near the
projector. Do not have rubber or plastic products touching the projector for a long time.
They will leave marks on the finish. If cleaning with a chemically treated cloth, be sure to
follow the cleaning product’s safety instructions.
Disposal
This product contains the following materials which are harmful to human bodies and
environment.
• Mercury, which is used in the lamp.
- To dispose of the product or used lamps, consult your local environment authorities for
regulations.
Notice
Please keep the original packing for possible future shipment. If you need to pack your
projector after use, adjust the projector lens to an appropriate position, put the
lenscushion around the lens and fit the lens cushion and projector cushion together to
prevent damage during transportation.