Sim2 Crystal - Manual (Page 38)

38 Using the projector
Display menu
Function Description
Aspect Ratio
There are several options to set the picture’s aspect ratio
depending on your input source. See
"Selecting the aspect ratio"
on page 30 for details.
Keystone
Corrects any keystoning of the picture. See "Correcting picture
distortion" on page 22 for details.
Position
Displays the position adjustment page. To move the projected
picture, use the directional arrow keys. The values shown on the
lower position of the page change with every key press you made
until they reach their maximum or minimum.
This function is only available when the Component 1, Component
2, or PC signal is selected.
Overscan
Adjustment
Conceals the poor picture quality in the four edges. You can also
manually press / to decide how much to be concealed.
Setting 0 means the picture is 100% displayed. The greater the
value, the more portion of the picture is concealed while the
screen remains filled and geometrically accurate.
PIP
Turns the PIP window on or off and makes related adjustments. See
"Displaying more than one image source simultaneously" on
page 32 for details.
PC & Component
YPbPr Tuning
H.Size
Adjusts the horizontal width of the picture.
Phase
Adjusts the clock phase to reduce picture
distortion.
Auto
Adjusts the phase, and frequency automatically
These functions are only available when the Component 1,
Component 2, or PC signal is selected.