Image menu color menu – Sim2 Crystal User Manual
Page 37
37
Using the projector
Image menu
Color menu
Function
Description
Picture Mode
Pre-defined picture modes are provided so you can optimize your
projector picture set-up to suit your program type. See
for details.
Load Settings From
Selects a preset mode that most suits your need for the picture
quality and further fine-tune the picture based on the selections
"Setting the User 1/User 2/User 3 mode" on
for details.
Brightness
Adjusts the brightness of the picture. See
for details.
Contrast
Adjusts the degree of difference between dark and light in the
picture. See
"Adjusting Contrast" on page 25
for details.
Color
Adjusts the color saturation level -- the amount of each color in a
video picture. See
for details.
Tint
Adjusts the red and green color tones of the picture. See
for details.
Sharpness
Adjusts the picture to make it look sharper or softer. See
for details.
Reset Picture Settings
Returns all settings in the Image and Color menus to the factory
preset values. See
"Resetting the picture mode" on page 24
for
details.
Rename User Mode
Renames User 1, User 2, or User 3. See
for details.
Function
Description
Black Level
Sets the picture grayscale as 0 IRE or 7.5 IRE. See
for details.
Clarity Control
Adjusts the picture clarity. See
"Controlling image clarity" on
for details.
Color Temperature
There are several color temperature settings available. See
"Selecting a color temperature*" on page 26
for details.
Color Temperature
Fine Tuning
See
"Setting a preferred color temperature" on page 27
for details.
Gamma Selection
See
"Selecting a Gamma setting" on page 27
for details.
Brilliant Color
See
"Adjusting Brilliant Color" on page 28
for details.
Color Management
See
for details.
Film Mode
See
"Setting Film Mode" on page 29
for details.
3D Comb Filter
See
"Setting 3D Comb Filter" on page 29
for details.
Dynamic Black
Automatically changes the black level of the projected pictures to
enhance the effect of contrast ratio.