Sim2 Crystal - Manual (Page 32)

32 Using the projector
Displaying more than one image source
simultaneously
Your projector is capable of displaying pictures simultaneously from two input sources,
which can be used to enhance your presentation in an interesting way. Ensure the
signals you want to display are correctly connected to the projector.
To display the PIP window:
• Using the remote control
Press PIP to display the PIP page and make adjustments by
following the steps starting from step 3 in the section "Using
the OSD menu" below.
When the PIP window is on, to change the PIP window size,
press SIZE repeatedly until a desired size is selected.
When the PIP window is on, to change the PIP window
position, press POSITION repeatedly until a desired position is
selected.
When the PIP window is on, to highlight one of the sources to
make adjustments, press ACTIVE repeatedly until the source
is selected.
• Using the OSD menu
1. Press MENU and then press / until the Display menu is
highlighted.
2. Press to highlight PIP and press ENTER. The PIP page
displays.
3. Highlight PIP and press / to select On.
The projector will select two currently active signals to display
and the last viewed picture will be displayed on the big
screen as a main source.
The PIP function is effective at below source combinations.
4. To change the Main Source or Second Source, press to
highlight Main Source or Second Source and press ENTER.
The source selection bar displays.
5. Use / to highlight the source you want to display for the main (bigger) or second
(smaller) window, and press ENTER to save the setting and go back to the PIP page.
6. To make OSD settings to one of the two sources (main or second), highlight Active
Window and press / to select the source you want to make adjustments.
The settings made on the OSD menus will only take effect on the active window. The following
OSD menu function cannot work on the active windows for the PIP: Auto Source Search.
7. To change the position of the smaller picture, highlight Position and press /
repeatedly until a suitable position is selected.
Source 2
Source 1 CVBS S-Video
HDMI 1/2 V V
Component 1/2 V V
PC V V
PIP
PIP
Main Source
Second Source
Active Window
Position
Size
On
Main
Top-Right
Large
EXIT Back
ENTER
Aspect Ratio
Keystone
Position
Overscan Adjustment
PIP
PC & Component YPbPr Tuning
Display
EXIT Back
0
S-Video
Anamorphic
Color System