Sim2 Crystal - Manual (Page 29)

29 Using the projector
To adjust and store the settings:
1. In the Color menu, highlight Color Management and press
ENTER. The Color Management page displays.
2. Highlight Primary Color and press / to select a color
from among Red, Yellow, Green, Cyan, Blue, and
Magenta.
3. Press to highlight Range and press / to select the
color range you wish to make adjustment. The bigger the
range, the more proportions of its two adjacent colors the
color contains.
Please refer to the illustration to the right for how the colors
relate to each other. For example, if you select Red and
set its range at 0, only pure red is selected. Increasing its
range will include both the red color close to yellow and
red color close to magenta.
Press to highlight Saturation and adjust the color
saturation level by pressing / .
If you select Red and set its range at 0, only the saturation
of the pure red will be affected.
Saturation is the amount of that color in a video picture. Lower
settings produce less saturated colors; a setting of “0” removes that
color from the image entirely. If the saturation is too high, that color
will be overpowering and unrealistic.
4. To leave and save the settings, press MENU once or EXIT twice.
Setting Film Mode
This feature helps improve picture quality when projecting
video image from a film-sourced DVD.
Setting 3D Comb Filter
This feature separates composite signal to Y (brightness)
signal and C (color) signal, and can help produce clearer
and sharper images with correct colors in place.
This function is only available when a Video signal is selected
Black Level
Clarity Control
Color Temperature
Color
S-Video
0 IRE
EXIT Back
Normal
Color Temperature Fine Tuning
Gamma Selection
Color Management
2.4
Color Management
Primary Color
Range
Saturation +15
+15
Magenta
ENTER
EXIT Back
Brilliant Color On
Dynamic Black On
3D Comb Filter
Film Mode On
On
Red
Yellow
Green
Cyan Magenta
Blue
Image Display
Black Level
Clarity Control
Color Temperature
Color
S-Video
0 IRE
EXIT Back
Normal
Color Temperature Fine Tuning
Gamma Selection
Color Management
Brilliant Color
2.4
On
Dynamic Black On
3D Comb Filter
Film Mode On
On
Image Display
Black Level
Clarity Control
Color Temperature
Color
S-Video
0 IRE
EXIT Back
Normal
Color Temperature Fine Tuning
Gamma Selection
Color Management
Brilliant Color
2.4
On
Dynamic Black On
3D Comb Filter
Film Mode On
On
Image Display