Sim2 Crystal - Manual (Page 26)

26 Using the projector
The Brightness, Color, Contrast, Tint functions can also be
accessible by pressing BRIGHTNESS, COLOR, CONTRAST, TINT
on the remote control to display the adjustment bar and then
you can press / to adjust the values.
Advanced picture quality controls
There are more advanced functions in the Color menu to be adjusted to your
preference. To save the settings, just press MENU to leave the OSD menu.
Setting Black Level
Highlight Black Level and press / on the projector or
remote control to select 0 IRE or 7.5 IRE.
The grayscale video signal is measured in IRE units. In some
areas which use NTSC TV standard, the grayscale is
measured from 7.5 IRE (black) to 100 IRE (white); however, in
other areas where PAL equipment or Japanese NTSC
standards are used, the grayscale is measured from 0 IRE
(black) to 100 IRE (white). We suggest that you check the
input source to see if it is with 0 IRE or 7.5 IRE, then select accordingly.
Controlling image clarity
You may have static or noisy projected pictures.
To achieve better picture clarity:
1. Highlight Clarity Control and press ENTER on the remote
control to display the Clarity Control page.
2. Press / to select the item you want to adjust and press
/ to set the desired value.
• Noise Reduction: Reduces electrical image noise
caused by different media players. The higher the
setting, the less the noise.
• Detail Enhancement: Sharpens the image. The higher
the setting, the more details the image reveals.
• Luma Transmission (Luminance Transmission
Improvement): Enhances picture brightness. The
higher the setting, the more distinct the effect.
• Chroma Transmission (Chroma Transmission Improvement): Reduces color
smear. The higher the setting, the more distinct the effect.
Selecting a color temperature
*
Highlight Color Temperature and select a preferred setting by
pressing / on the remote control.
There are several color temperature settings available.
1. Lamp Native: With the lamp’s original color temperature
and higher brightness. This setting is suitable for
Black Level
Clarity Control
Color Temperature
Color
S-Video
0 IRE
EXIT Back
Normal
Color Temperature Fine Tuning
Gamma Selection
Color Management
Brilliant Color
2.4
Dynamic Black
3D Comb Filter
Film Mode On
On
On
Image Display
On
Black Level
Clarity Control
Color Temperature
Color
S-Video
0 IRE
EXIT Back
Normal
Color Temperature Fine Tuning
Gamma Selection
Color Management
Brilliant Color
ENTER
Clarity Control
Noise Reduction
Detail Enhancement
Luma Transmission
Chroma Transmission
0
3
0
0
2.4
EXIT Back
On
Dynamic Black On
3D Comb Filter
Film Mode On
On
Image Display
Black Level
Clarity Control
Color Temperature
Color
S-Video
0 IRE
EXIT Back
Normal
Color Temperature Fine Tuning
Gamma Selection
Color Management
2.4
Brilliant Color On
Dynamic Black On
3D Comb Filter
Film Mode On
On
Image Display