Setting the flash mode – SIGMA DP3 Quattro User Manual
Page 88

88
WARNING !!
Please be aware that when you charge the external flash, the flash
mode icon will turn on and off. If you release a shutter during such time,
it will not flash and causes camera shake or underexposure.
When camera exposure mode
P, A, or S is used, shutter speed can be
set up to 1/200 sec. (There is no limit when
M mode is used.)
Flash photography can be used in the following range. (
P Mode)
ISO
Flash Exposure Range
ISO100
Approx. 1m - 5m
ISO200
Approx. 1m - 7m
ISO400
Approx. 1m - 10m
ISO800
Approx. 1m - 14m
ISO1600
Approx. 1m - 20m
ISO3200
Approx. 1m - 28m
ISO6400
Approx. 1m - 40m
TIP
If the ISO sensitivity setting is set to [
ISO AUTO] and the external flash
is used, the value set in [
Lower limit] of [ISO Auto Range] will be
applied.
SETTING THE FLASH MODE
It is possible to select other flash modes such as Exposure Compensation
mode or Red-Eye Reduction mode.
The Flash Mode can be set in the Quick Set Menu (P.34) or [
Capture
Settings] (P.27) → [Flash] → [Flash Mode].
Normal Flash (Default)
Redeye
Slow Sync.
Redeye + Slow