SIGMA DP3 Quattro - Manual (Page 131)

131
CONNECTING YOUR CAMERA TO A COMPUTER
The dp3 Quattro camera can be connected directly to a computer using the
provided USB cable. Make sure that the camera is off before connecting it
to the computer. Data transfer rates will vary depending on the computer
and operating system used. For further information, please refer to Help
within SIGMA Photo Pro.
1
Turn the computer on.
2
Connect your camera to a computer with
the provided USB cable.
WARNING!!

Please ensure your computer is not in sleep mode whilst your camera
connects to the computer. It may cause the data to be lost or damaged.

Do not connect another USB cable to the computer while your camera
is connecting to the computer. It may cause the data to be lost or
damaged.

Please use only the USB cable supplied with your camera.

The shutter button and color LCD monitor will be disabled while the
camera is connected to the computer via a USB cable.

The Auto Power Off function does not work while connecting the USB
cable.