SIGMA DP3 Quattro - Manual (Page 115)

115
DEVELOPING RAW DATA INSIDE THE CAMERA
It is possible to develop RAW data inside the camera, and create a JPEG
format image.
RAW development setting screen
1 Exposure Compensation (P.76)
2 White Balance (P.62)
3 Image Quality (P.69)
4 Image Size (P.70)
5 Aspect Ratio (P.71)
6 Color Mode (P.79)
7 Color Space (P.84)
8 Tone Control (P.83)
9 Icon to start image development
10 Description of selected icon
1
While displaying the RAW image, press the button and open
[ Playback Menu] (P.27), then select [RAW Development].
2
In the sub menu, select the image to develop in RAW format from the
following two methods;
Select Files
Display the picture to develop by pressing the
buttons (when it is displaying 9 pictures over the
screen, the button will appear instead), and
confirm it with the button.

It is possible to process [ Selecting File] even when
an image is not displayed in Step 1.
Current File
It displays the image selected at the Step 1.

It is not possible to select [ Current File] when
JPEG images are selected at the Step 1.

After selecting the image, the message [ Now Processing…] will appear
until it displays the RAW development setting screen.