SIGMA DP3 Quattro - Manual (Page 81)

81

Normally, set it to [ OFF] (Off).
Toning Effect (Only with Monochrome)
Monochrome images can be finished with preferred color tones.
B/W
B&W (Default)
R
Red
WARM
Warm Tone
SEPIA
Sepia
G
Green
BG
Blue Green
B
Blue
COLD
Cold Tone
BP
Blue Purple
P
Purple
1
Select your preferred Color Mode from [ Capture Settings] (P.27) →
[ Color Mode], and press the button to display Color Mode Detailed
Setting screen.
To set from Quick Set Menu (P.34), select preferred Color Mode, and press
the button to display Color Mode Detailed Setting screen.
2
Press the buttons to select [ Contrast],
[ Sharpness] or [Saturation] on the Color
Mode Detailed Setting screen, and use the
buttons to select adjustment value
(Adjustable up to ±1.0 with 0.2 steps) or
set the preferred option.
3
Press the button to apply the setting or the button to close the
sub-menu without making any changes.

To reset, press the button.
If you adjust image parameters, their icon is displayed on
the left of the color LCD monitor.