SIGMA DP3 Quattro - Manual (Page 119)

119
WARNING !!

When Folder numbering / File numbering is reached to “999-9999”,
even if the card has the capacity, the message of [Card Full] will be
displayed and it is not possible to take pictures any more. Please
check the File numbering in reviewing display. If the file number of
“999-9999” exists in the card, please proceed as follow.
1 . Transfer all files in the card to your PC.
2 . Format the card.
3 . If the [ File Numbering] is set to [Continuous], once set to [Auto
Reset].
4 . If you usually set [ File numbering] to [Continuous], set to
[ Continuous] once again.

If you wish to continue to take pictures with any other card, please
proceed it from step 3.
TO CHANGE FILE NAMES
File name of images can be selected from either “SDIM” or “DP3Q”.
Select the setting from [ Camera Settings] (P.27) → [File Name].
SDIM (Default) File name will be “SDIMxxxx.xxx”.
DP3Q File name will be “DP3Qxxxx.xxx”.

The number in the file name will be continuous even after changing the
setting from SDIM to DP3Q or vice versa.

When [ Adobe RGB] is selected from [ Capture Settings] (P.27) →
[ Color space], the file name will consist of “_SDI” instead of “SDIM”, and
become “_P3Q” instead of “DP3Q”.