SIGMA DP3 Quattro - Manual (Page 116)

116
3
In the RAW development setting screen, press the buttons to select
an item, and comfirm it by pressing the button.

It is possible to set details of each option in White Balance (P.62) and
Color Mode (P.79). Press the button to display the setting page. For
further information, refer to the related sections in this instruction manual.
4
While checking the image, use front/rear Dials or buttons to change
the adjustment value (or option). Then, confirm it by pressing the
button.
5
Repeat Step 3 and 4 in case there are multiple items to change.
6
After finalizing the setting, select (icon to start image development) and
press the button.
7
Select [ Yes] by using the buttons, and confirm it by pressing the
button.
In order to stop the process, select [ No] by using the buttons, and
press the button.

For the JPG images developed from
RAW data, mark will appear in the
image.

The File Number of the JPEG image
developed from RAW data will become
the next number following the final
recorded file in the memory card.
WARNING !!

In case there is insufficient space in the memory card, there will be a
warning message and it is not possible to develop RAW file.

It is recommended to use SIGMA Photo Pro for further detailed
adjustment and image editing.