Self timer – SIGMA DP3 Quattro User Manual
Page 58
58
The number on the lower right of the color LCD monitor is
the buffer capacity. It is the maximum number of frames
for continuous shooting. (If the maximum number of
frames for continuous shooting exceeds 9 frames, the
display will not change from 9)
The maximum number of frames and speed of continuous shooting are
as follows:
Image Size (Resolution mode)
Image
Quality
JPEG
7
7
12
12
3.7
3.7
4.5
4.5
RAW
7
12
3.7
4.5
RAW+JPEG
7
12
3.7
4.5
The upper rows show the maximum number of frames, the lower rows show the
maximum shooting speed in continuous mode (frames per second).
SELF TIMER
When you want to include yourself in the picture or avoid camera shake,
please use the self-timer.
Self Timer 2 sec
The shutter will be released 2 seconds after the shutter button is fully
depressed.
Self Timer 10 sec
The shutter will be released 10 seconds after the shutter button is fully
depressed.
After composing the picture, press the shutter button “half-way” and adjust
the focusing. Then, press the shutter button the rest of the way and the
self-timer will activate. During the self-timer operation you will hear an
electronic beeping sound. The beeping sound will be much faster during
the last two seconds, before the shutter is released.
When [
Camera Settings](P.27) → [Sound Settings] → [Operation
Sound] menu is set to [Off], the electronic sound will not beep even if the
self-timer is operated.