Sierra Video TyLinx Pro - Manual (Page 27)

Admin Utilities 27
© 2012 Sierra Video Systems
 Device Map – provides a visual representation of the system topology. You cannot change
connections settings on this screen; however, you can perform all the setup actions available
on the Device Setup View. This view also tells you at a glance which of the routers has panels
connected and there quantity. Once a device is loaded into TyLinx Pro this screen will show
up on startup.
Setup Screens
 Router Communications – the first screen that appears when opening the router setup
window. This screen is used to configure the network and serial port settings in the router.
 Names –changes the Destination, Source, and Level names in the router.
 Salvos – add, delete, and setup salvos in the router.
 Audio Gains – adjusts both the input and output gains in the router, if the levels support the
feature.
 Output Slew – set the slew of an output to either SD or HD on supported levels.
 Input Equalizers –toggles input equalizers on or off for supported levels.
 Room Grouping – configures the room groups in supported routers.
 Alarm Setup Screen – setup the alarms in supported routers.
 Reclockers – adjust reclockers in supported routers.
Advanced Setup
 Dimensions – changes the virtual source, destination, and level size of the router.
 Mapping – virtually maps the router and import/export from Excel.
 Layers – configures the hardware layers in the router and maps them to virtual levels.