Sierra Video TyLinx Pro User Manual

Page 140

TyLinx Pro Help

140

Salvo Menu- This function is not available in the SCP-150

Scroll Back- Causes lists to display from higher number to lower. N/A for the

SCP-150.

Scroll Forward- Causes lists to display from lower number to higher. N/A for the

SCP-150.

Select- Moves cursor. N/A for the SCP-150.

Select/Shift- “Select/Shift” is a dual mode function. Pressing once is the “Select”

function (moves cursor). Holding down the button is the “Shift” function similar to a

standard computer keyboard.

Select All Levels- Enables all levels Note; all levels are enabled as a default. This

function restores all levels to enable if the previous switch was other than all levels.

Take- Initiates command

None-

This removes any programming from the button.

Level;

This list contains the levels of control active on the router. When this function is

applied to a panel button the LED for that button will light allowing individual level selection.

After a destination is selected all level buttons will light. Pressing a level button will unselect

the level indicated by extinguishing the light. Holding down the button will cause the panel to

cycle from enabling only the level selected to all levels enabled.