Sierra Video TyLinx Pro User Manual

Page 209

Console Player

209

To lock a destination, right click the intended destination control and the lock options assigned to the

user shall be presented as a context menu. Click the lock option desired and the destination shall be

locked.

To unlock an destination, right click a locked destination control and select "Unlock". The unlock

attempt requires the user confirm they really intended to unlock the destination. If the user attempting

the unlock has authority to unlock the locked state of the destination then the destination shall be

unlocked, otherwise, a red error event log entry will display the failure.

6.2.5 Diagonal

A button labeled Diagonal in the Actions section may be visible on some console configurations when

enabled on the panel properties menu (Can Diagonal). This button is used to create a diagonal switch

pattern on the switching router matrix. Typically this capability is used by Engineers for testing and will

likely not be enabled on most operator consoles.
To use, click the Diagonal button in the "Action" window.

The Diagonal Control will then be presented as shown below: