Uploading test sequences, Changing test sequences, Deleting test sequences – Seaward PATGuard 3 User Manual

Page 124

PATGuard 3

124 / 153

The Test Sequence Details window allows you to enter details of the Test Sequence including the Test
Sequence name, the specifics of the tests to be carried out, and whether the test should Include Visual
Inspection and Include Polarity Test.

For each of the available tests, in this case Socket, Earth Bond, Insulation, Substitute Leakage, Flash,
Leakage, Touch Leakage and RCD Test, select from the list of options for Output, Limit, Test Duration
and No. of Tests. For any tests you do not wish to include in the Test Sequence, set Limit to Skip.

Test Sequence Details window

Click OK to add the Test Sequence. The Test Sequence will now appear in the

Main Window

Main Window - New Test Sequence

Uploading Test Sequences

To upload a Test Sequence to your tester, ensure the compatible Instrument is connected to the PC. Right-
click the Test Sequence name in the

Main Window

and select Upload Test Sequence.

Changing Test Sequences

Test Sequences can be changed at any time by double-clicking the Test Sequence name in the

Main

Window

or by right-clicking on the Test Sequence in the

Main Window

and selecting Details... This will

bring up the

Test Sequence Details window

Deleting Test Sequences