Seaward PATGuard Work About - Manual (Page 47)

Seaward PATGuard Work About 2 User Manual
- 47 - Rev. 1.3
Figure 63: Download display
The COM Port and Baud rate settings are dependent on the PrimeTest check box. The Baud rate will
be the default setting for the tester. If this has been changed on the Tester then it will necessary to change
it here.
The correct COM Port will have to be set initially (see Using Bluetooth) but will be remembered by the
program according to the PrimeTest checkbox selection.
A Download action can be performed without any Upload file (xpg) being open whereas an Upload action
to a tester always contains the data from the opened Upload file (xpg) which maybe modified by direct
entry at the PDA. So when downloading it is possible to associate the Download file (sss) created with the
currently displayed PATGuard database. This is useful as it can help prevent the wrong database in
PATGuard database programs from being updated when processing the Download file (sss). Checking the
box for This download is for this database will place a marker in the Download file (sss) so that a
warning message is displayed should an attempt be made to open the Download file in the wrong
database on the PC.
PrimeTest 300 / 350
Ensure the Prime Test box is checked. It will also be necessary to set the correct COM Port before the
first Download. Once set the program will remember this port number until changed by the user.
Use the tester menu to select Download to PC and ensure the Bluetooth connection is established. Please
refer to the tester Operating Instructions concerning Download to PC.
Select Download on the Download display of the PDA. Then select Send on the tester.
The Bytes received value should count up on the PDA as the download proceeds.