Seaward PATGuard Work About - Manual (Page 43)

Seaward PATGuard Work About 2 User Manual
- 43 - Rev. 1.3
Ensure the PrimeTest box is not checked. If you have Tagged Assets in the Upload file (xpg) the Only
upload tagged assets checkbox will be available and if you only wish to Upload tagged Assets then
ensure this box is checked.
Select Upload on the Upload display of the PDA. Use the tester’s menu system to select Remote Mode
then acknowledge the advisory message on the PDA and the Upload will commence.
Having prepared the tester for re-testing, use PATGuard Work About as a ‘To do’ list of Assets to be
tested while carrying out re-tests. Please refer to the tester User Instructions concerning Automatic testing
from Upload Assets.
Windows Pocket PC
Note
For Windows Pocket PC to Upload to the tester via a Bluetooth SNEU Adaptor the following procedure
is necessary to make the Bluetooth connection. For Windows Mobile 5.0 no connection procedure is
necessary.
Prior to the Upload action we need to establish the Bluetooth connection. Start the Bluetooth Manager
program on the PDA.
Figure 57: Bluetooth Manager My Shortcuts display
Select and hold the Brainboxes RS232 Adaptor:Serial 01.