Seaward PATGuard Work About - Manual (Page 23)

Seaward PATGuard Work About 2 User Manual
- 23 - Rev. 1.3
The user-defined Test Sequence is saved in the Download file (sss) and will be available on the PDA each
time the associated Upload file (xpg) is opened, similarly if this Test Sequence is altered the Download
file (sss) is updated and the new sequence will be available instead.
Toolbar
File
Selecting File then Open allows you to select the appropriate Upload file (xpg) that you wish to display
and later optionally Upload into a tester.
Selecting File then New allows you to create a new file in which Sites, Locations, Assets and if required
Tests and Test Results can all be added directly into the PDA.
Note
Assets created in a New file cannot be Uploaded to a tester.
Edit
The Find option allows the user to search for an Asset by entering the Asset ID.
If found the Asset is then highlighted and displayed on the main screen.
View
The View pop-up menu allows you to filter the Asset display according to re-test type.
All is the default setting. With this setting all Assets will be displayed.
Visual is selected when Visual re-tests are to be carried out with results entered directly in the PDA.
Full is selected when only Assets with Full re-tests are to be displayed.
Assets with no tests will be displayed in all selections.
Note
Regardless of the View option selected, only Assets with Full re-tests will be Uploaded into a tester. And
these Assets will be filtered according to re-test data from the PATGuard database of the Asset record
and tester selected.
Tools
The Download option enables the program to receive download data direct from a PAT tester.
The Upload option enables the program to send re-test data direct to a PAT tester.
The Test Sequence option allows the user to compile a list of tests into a sequence to be added to
numerous Assets one by one.
Help
The About option will display information about PATGuard Work About.