Seaward PATGuard Work About - Manual (Page 42)

Seaward PATGuard Work About 2 User Manual
- 42 - Rev. 1.3
Figure 56: Upload display
PrimeTest 300 / 350
At the tester use the tester menus to select ‘Upload from PC’ and ensure the Bluetooth connection is
established. Please refer to the tester Operating Instructions concerning Upload from PC.
Ensure the Prime Test box is checked. It may be necessary to set the correct COM Port before the first
Upload (see Using Bluetooth). Once set the program will remember the port number until changed by the
user.
If you have Tagged Assets in the Upload file (xpg) the Only upload tagged assets checkbox will be
available and if you only wish to Upload tagged Assets then ensure this box is checked.
Select Upload and acknowledge the advisory message and the Upload will commence.
Having prepared the tester for re-testing, use PATGuard Work About as a ‘To do’ list of Assets to be
tested while carrying out re-tests. Please refer to the tester Operating Instructions concerning automatic
testing from Upload Assets.
Supernova / Europa PAT Testers
Note
If your PDA does not have an RS232 serial port you will need a Bluetooth SNEU Adaptor (see
Accessories) to communicate with these testers. If this is the case the Bluetooth SNEU Adaptor will need
to be paired or partnered with the PDA (see Using Bluetooth) before the first Upload or Download
action.
If using a Bluetooth SNEU Adaptor, plug the Adaptor into the RS232 Port of the tester. The Adaptor,
when used with Europa PAT testers will require external power. Connect the power lead to the Adaptor
and plug the power supply into a suitable mains outlet. Adaptors used with Supernova testers do not
require any external power. Ensure the tester is powered up.