Direct entry of test results – Seaward PATGuard Work About User Manual

Page 24

Text mode
Original mode

Seaward PATGuard Work About 2 User Manual

- 24 -

Rev. 1.3

Direct entry of Test Results

Test results can be manually entered directly into PATGuard Work About. Select the Asset for which
Test Results are to be recorded to display the associated tests.

If both Full and Visual re-tests are possible for the selected Asset the following message will prompt you
choose the test type.

Figure 25: Choose Test Type display

Select the appropriate Test Type to display the Tests.

Note

Visual Tests are defined as Tests for which no measurement value is required. The converse is true for
Full Tests i.e. they are defined as having a measurement value.

Figure 26: Tests display