Seaward PATGuard Work About - Manual (Page 29)

Seaward PATGuard Work About 2 User Manual
- 29 - Rev. 1.3
The Outbound COM Port is for Supernova and Europa PAT testers.
Make a note of the COM Port numbers for the testers you will be using. The COM Port number is
required for both Upload and Download actions.
Bluetooth Pairing – PrimeTest 300 / 350
Before any data transfer can take place it will be necessary for the PDA Bluetooth to be paired with the
PrimeTest Bluetooth.
With the PDA powered on, Search for the PDA Bluetooth signal and set it into the Bluetooth Favourites
PC field. Please refer to your tester Operating Instruction booklet for details.
Bluetooth Pairing – Supernova and Europa PAT Testers
Note
This is only required if your PDA does not have an RS232 serial port and relies upon a Bluetooth SNEU
Adaptor (see Accessories) to communicate with the tester.
Before any data transfer can take place with Supernova and Europa PAT testers via the Bluetooth SNEU
Adaptor it will be necessary to pair this with the PDA Bluetooth.
To do this, plug the Adaptor into the RS232 port of the tester. The Adaptor, when used with Europa PAT
testers will also require external power. Connect the power lead to the Adaptor and plug the power supply
into a suitable mains outlet. Adaptors used with Supernova testers do not require any external power.
Ensure the tester is power up.
To pair the Adaptor with the PDA, start the Bluetooth Manager program on the PDA.
Figure 33: Bluetooth Manager display