Seaward PATGuard Work About - Manual (Page 27)

Seaward PATGuard Work About 2 User Manual
- 27 - Rev. 1.3
Using Bluetooth
Before a Bluetooth connection can be used by the program it is necessary to establish a partnership
between the tester Bluetooth and the PDA Bluetooth. This is only required on initial set up, not during
every data transfer.
Establishing partnerships can vary with the Microsoft platform on the PDA.
Using Bluetooth with Microsoft Pocket PC
Note
Some of the Figures in this section may be different from those shown on your PDA due to differences in
operating platforms, build level, Microsoft application versions and other Bluetooth devices and
partnerships.
It is necessary to establish the correct COM Port for PATGuard Work About. Use the Bluetooth setting
information on the PDA. From Start select Settings.
Figure 30: Start Menu
Select the Connections Tab, then the Bluetooth icon.