Seaward PATGuard Work About - Manual (Page 41)

Seaward PATGuard Work About 2 User Manual
- 41 - Rev. 1.3
Figure 54: Tagged Assets
To tag all Assets within a Site or Location select Tag for Upload from the context menu of the relevant
Site or Location.
Figure 55: Location Context Menu
You can tag as many or as few Assets as required and the tag information is stored in the Upload file
(xpg) and thus it will remain the same the next time you open that file on the PDA.
To remove a tag from a single Asset simply select the corresponding ticked checkbox, the tick will be
removed and this will indicate the Asset is no longer tagged. To remove the tags from all Assets below a
Site or Location select Clear Upload Tags from the context menu of the required Site or Location.
If almost all the Assets need to be Uploaded it may be useful to select Tag for Upload from the context
menu of the root, then select the unwanted Assets individually to remove their tags.
Uploading Assets
To Upload Assets select Upload from the Tools pop-up.