RLE FMS8 - Manual (Page 69)

Falcon User Guide
69
Other settings available from the Modem
Configuration Menu:
Option pd designates the number of times to call the
pager until the alarm is acknowledged - 1 to 255.
Pagers are called in sequence. For example, if
pd
is set to 3 and pagers 1, 7, and 10 are programmed
to be notified, the Falcon dials 1, 7, 10, 1, 7, 10, 1,
7, 10. As soon as the alarm is acknowledged, the
Falcon quits dialing the pagers with that particular
access code. Pagers with different access codes are
still dialed.
p i allots the number of minutes to wait between
redials.
pa establishes a number to call if the alarm isn’t
acknowledged ( pi time - 1). A numbered contact
(one through 16) designates the number to call.
pb designates the pager baud rate.
Pager Unsuccessful Traps will allow the
Falcon to send an SNMP trap to the NMS if set to
YES .
Pager Resend will send all unacknowledged
alarms in the Alarm History menu if set to YES.
It will only send the last unacknowledged alarm if
set at
NO.
pw defines a remote access password, seven
characters max.
r sets a number of times to call a number until the
call is successful, from one to 255.
v establishes the number of minutes to wait between
redials, from one to 255.
h defines a numbered contact (one through 16) to
call to check communications.
t sets a time (24 hour format) to make the
communications check.
** System Menu/Help **
SS - System Status
CA - Current Alarms
KA - Kill All Alarms
LM - Log Menu
TI - Display Date/Time
AD - ADC Input Values
MS - Modem Stats
NS - Network Stats
AT - Arp Table
SC - System Confi g
DU - Dump Network Packets
NT - Network Trace
PING - Ping an IP Address
EX - Exit to Bootloader
Enter Menu Selection >
Enter Menu Selection > SC ******
** Main Confi guration Menu **
1. System Menu
2. IP Confi g Menu
3. Modem Confi g menu
4. EIA-485 Confi g menu
5. Factory Menu
6. Load/Save Confi g Data
7. Confi guration Password
8. E-Mail, SMTP Confi g Menu
X. Exit
Enter Menu Selection >
Enter Menu Selection >3
** Modem Confi g Menu **
-i Enter new initialization string:
at&d3&c1s0=1
-f Enter new dial prefi x: atdt
-pn Phone numbers
-pd Enter new pager deliveries: 1
-pi Enter new pager interval: 5
(Minutes)
-pa Enter Pager No Ack Alarm: 0
-pb Enter Pager Baud Rate: 1200
-pu Pager Unsuccessful Traps: No
-pr Pager Resend Enabled: No
-pw Enter new modem password: rletech
-r Enter new redial attempts: 10
-v Enter new redial interval: 1
(Minutes)
-h Enter new comm check phone: 0
-t Enter new comm check time:
-a Force alarm ack code:
-q quit
-x Exit & Save (Warning: This will dis-
connect & initialize the modem)
Enter Menu Selection >
Enter Menu Selection >pd
Enter new pager deliveries: 5
Enter Menu Selection >pi
Enter new pager interval: 10
Enter Menu Selection >pa
Enter Pager No Ack Alarm: 6
Enter Menu Selection >pb
Enter Pager Baud Rate: 2400
Enter Menu Selection >pw
Enter new modem password: pass4
Enter Menu Selection >r
Enter new redial attempts: 4
Enter Menu Selection >v
Enter new redial interval: 3
Enter Menu Selection >h
Enter new comm check phone: 0
Enter Menu Selection >t
Enter new com check time:(HH:MM):01:00
Enter Menu Selection >a
Force alarm ack code:
Enter Menu Selection >pu
Pager Unsuccessful traps: Yes/No
Enter Menu Selection >pr
Pager Resend Enabled: Yes/No
a acknowledges all unacknowledged alarms. This
acts as a master code and can override all other
alarm acknowledge codes.