RLE FMS8 - Manual (Page 36)

Falcon User Guide
36
Flash Program
The
Flash Program link specifies which versions
of Falcon firmware are loaded onto the Falcon. Only
two copies can be loaded onto the Falcon at a time.
In order to upload a program update, the backup
flash must be blank. If it is not, click the
Erase
Backup button to erase it. This erases the oldest
version of firmware stored on the Falcon. Using a
TFTP client software program, send the falcon(vx.x
bx).bin file to the IP address of the Falcon. The
Falcon verifies the file name starts with
falcon and
ends with .bin . Other file names or types will
not be accepted. The Falcon will accept TFTP block
sizes of 64, 128, 256, 512, or 1024.
Once the program has been successfully uploaded,
the Falcon will automatically reboot.
Product Registration
The
Product Registration link allows the
Falcon to be registered on RLE’s database at the
time of configuration. IP address, subnet makst and
default gateway must already be set on the Falcon
before this link will work.