RLE FMS8 - Manual (Page 26)

Falcon User Guide
26
Relays
The Relays link displays a screen that configures
the Falcon’s output relays.
Select a type for each relay. The time field then
designates the number of seconds the relay is active:
timed control 30=30 seconds,
-1 = continuous,
following the alarm input.
Label is the appropriate label for the particular
relay.
BACnet Instance is a BACnet object identifier.
It is a numerical code used to identify the input.
This code must be unique within the BACnet
device. Refer to the BACnet standard for further
information.
BACnet Unit is the BACnet engineering units.
This represents the units of measurement for the
input. Refer to the BACnet standard for further
information.
Schedule designates which of the schedules from
the Schedule Configuration menu the relay
will adhere to.
Again, the Submit Changes button must be
pressed once changes are complete, or all changes
will be lost.