RLE FMS8 - Manual (Page 67)

Falcon User Guide
67
3 - Modem Configuration Menu
This menu allows configuration of the modem for
dial-in and dial-out functions. Dial-in functions
include remote access for inquiry, data uploads,
I/O configuration, and alarm acknowledgement.
Dial-Out functions include: numeric and alphanu-
meric paging, heartbeat communications check, and
ASCII string messaging to remote PCs. Up to
sixteen numbers can be configured. Numbers are
dialed immediately once an alarm is detected.
Option i changes the initialization string. This
string is sent to the modem after power up and
termination of a phone call. The string can be
a maximum of 38 characters.
&c1 and &d3 are
mandatory. s0=1 sets the modem to answer after
one ring.
Option f sets a dial prefix. Enter a specific Hayes
compatible command or dial modifier here. This
entry supports a maximum of 38 characters. The
default is set to
atdt .
Option pn displays the Phone Number Configura-
tion Menu. This menu offers a variety of different
configuration options.
Option 1 on the Phone Number Configuration
Menu identifies which type of device the Falcon will
call. Use the
text option to dial a PC receiving
ASCII strings. Use the numeric pager option
for numeric pager setup. Use the alphanumeric
pager option for alphanumeric pager setup. Select
FalconView to dial a PC running FalconView soft-
ware.
Option 2 allows entry of a pager service number for
the numeric and alphanumeric pager entries. Each
comma after the pager number represents a two
second delay. This delay is used to allow enough
time for the pager service to answer before request-
ing the pager ID. Experimentation with the proper
number of commas may be necessary, as the time
delay needed before the request for the pager ID will
vary from service to service.
** System Menu/Help **
SS - System Status
CA - Current Alarms
KA - Kill All Alarms
LM - Log Menu
TI - Display Date/Time
AD - ADC Input Values
MS - Modem Stats
NS - Network Stats
AT - Arp Table
SC - System Confi g
DU - Dump Network Packets
NT - Network Trace
PING - Ping an IP Address
EX - Exit to Bootloader
Enter Menu Selection >
Enter Menu Selection > SC ******
** Main Confi guration Menu **
1. System Menu
2. IP Confi g Menu
3. Modem Confi g menu
4. EIA-485 Confi g menu
5. Factory Menu
6. Load/Save Confi g Data
7. Confi guration Password
8. E-Mail, SMTP Confi g Menu
X. Exit
Enter Menu Selection >
Enter Menu Selection >3
** Modem Confi g Menu **
-i Enter new initialization string:
at&d3&c1s0=1
-f Enter new dial prefi x: atdt
-pn Phone numbers
-pd Enter new pager deliveries: 1
-pi Enter new pager interval: 5
(Minutes)
-pa Enter Pager No Ack Alarm: 0
-pb Enter Pager Baud Rate: 1200
-pu Pager Unsuccessful Traps: No
-pr Pager Resend Enabled: No
-pw Enter new modem password: rletech
-r Enter new redial attempts: 10
-v Enter new redial interval: 1
(Minutes)
-h Enter new comm check phone: 0
-t Enter new comm check time:
-a Force alarm ack code:
-q quit
-x Exit & Save (Warning: This will
disconnect & initialize the modem)
Enter Menu Selection >
** System Menu/Help **
SS - System Status
CA - Current Alarms
KA - Kill All Alarms
LM - Log Menu
TI - Display Date/Time
AD - ADC Input Values
MS - Modem Stats
NS - Network Stats
AT - Arp Table
SC - System Confi g
DU - Dump Network Packets
NT - Network Trace
PING - Ping an IP Address
EX - Exit to Bootloader
Enter Menu Selection >
Enter Menu Selection > SC ******
** Main Confi guration Menu **
1. System Menu
2. IP Confi g Menu
3. Modem Confi g menu
4. EIA-485 Confi g menu
5. Factory Menu
6. Load/Save Confi g Data
7. Confi guration Password
8. E-Mail, SMTP Confi g Menu
X. Exit
Enter Menu Selection >
Enter Menu Selection >3
** Modem Confi g Menu **
-i Enter new initialization string:
at&d3&c1s0=1
-f Enter new dial prefi x: atdt
-pn Phone numbers
-pd Enter new pager deliveries: 1
-pi Enter new pager interval: 5
(Minutes)
-pa Enter Pager No Ack Alarm: 0
-pb Enter Pager Baud Rate: 1200
-pu Pager Unsuccessful Traps: No
-pr Pager Resend Enabled: No
-pw Enter new modem password: rletech
-r Enter new redial attempts: 10
-v Enter new redial interval: 1
(Minutes)
-h Enter new comm check phone: 0
-t Enter new comm check time:
-a Force alarm ack code:
-q quit
-x Exit & Save (Warning: This will dis-
connect & initialize the modem)
Enter Menu Selection >
Enter Menu Selection >pn
Phone Number Confi guration Menu
Number 1 of 15
1. Type: Alpha-Numeric
Pager
2. Number: 18008418837,,
3. Pager Id: 9702278874
4. Acknowledge code: 464
5. Dial back on RTN: Yes
7. Next
8. Return
Enter Menu Selection>